Image Gallery

Sections: Images

« Previous Image Next Image »


Is this a known clash between the silk screen layout and the documentation for this transverter?

Submitted by: GI0GDP


  1. DL9YEB | 4 February 2015

    Hello Geoff,
    i walked into the same trap....
    The two R´s are only moved on the 2006 pcb, but R26 is orientated to GND and R27 between B and C of Q9, as shown in the schematic.

    vy 73 de Mat, DL9YEB

Your Name:
Security Image
Enter the code you see in the image above (case sensitive).
Click on the image to refresh it.